*Lead times may vary, review delivery information with your Authorized Morgan Distributor.
FASTTrack Delivers Quality
Morgan's FASTTRACK delivery program is the quickest way of getting your dry freight bodies on the road. Along with our standard features, you can pick the size, liner option package and a variety of options listed below. All you have to do is make your selection, provide the chassis and leave the rest to Morgan craftsmanship and customer service. Under normal circumstances, your dry freight bodies will be on their way to you in seven days after receiving the chassis. Lead times may vary, so review delivery with your local Morgan representative. For more information on how the Morgan FASTTRACK combines quality and quick delivery, please contact your local Authorized Morgan Distributor or call 1-800-666-7426.
Standard Features
Subframe: 4" I-beam longrails, 3" steel I-beam crossmembers.
Floor Type: 1-1/8" hardwood flooring.
Side Walls: White, aluminum sheet & post construction. Steel Z posts.
Front-end Assembly: Aerodynamic design with contoured Poly-TuffTM corner caps, aluminum 9" top radius and 5" corner radius. Streamlined extruded aluminum body moldings, connectors and rails (TruckSkinTM compatible).
Rear Frame: Header design with rain channel/drip rail diverts water and provides better clearance light protection. Painted steel threshold with drain holes. Maximum door opening. Curb side grab handle.
Rear Door: Rear overhead door.
Roof Assembly: Aluminum sheet with Morgan's anti-snag, low profile roof bows for improved adhesive seal at all contact points.
Lighting: Interior dome light with switch in cab. Easy maintenance, sealed wire harness.
Warranty: Five-year limited warranty.
Size Options
| 85" |
12', 14', 16', 18', 20', 22', 24', 26' |
| 91" |
12', 14', 16', 18', 20', 22', 24', 26' |
| 97" |
16', 18', 20', 22', 24', 26' |
| 103" |
18', 20', 22', 24', 26' |
| 97" |
18', 20', 22', 24', 26' |
| 103" |
22', 24', 26' |
Interior Liner Option Packages
FT-1
- Sides: 3/8" plywood, full height
- Front: 1/2" full height
FT-2
- Sides: 24" high, 3/8" plywood from floor and 24" plywood from ceiling with 3 Apitong slats, evenly spaced
- Front: 1/2" plywood, full height
FT-3
- Sides and front: 10-1/2" Apitong scuff
- Sides and front: 6 rows Apitong slats
FT-4
FT-5
- Sides & front: 1/2" plywood, full height
FT-6
- Sides: 10-1/2" Apitong scuff
- Sides: 7 rows Apitong slats
- Front: 1/2" plywood, full height
|
|
FASTTRACK Options
Interior Liner
- Additional Apitong slats (sides and front)
- 10-1/2" Apitong scuff (sides and front)
- 3/8" plywood, 48" high sides
- E-track, recessed or surface-mounted
- Tie-rings
- Galvanized steel scuff with 3/4" plywood backing where applicable
Doors
- Side door, single panel, standard height with step & grab handle
- Two panel door
- WhitingTM rear overhead door
Floors & Understructure
- 1-3/8" laminated hardwood
- Threshold, 24" & 48" steel diamond plate (leading edge routed)
- Additional crossmembers for forklift loading: rear 4' of body
Roof
- Translucent roof increases daytime visibility
Lighting
- Domelight with switch at rear
- Additional interior domelights
- Recessed taillights
- Boxed taillights
Bumpers and Underride
- Wood filled dock bumpers
- Full-width drop step bumpers
- 5" structural steel underride protector with pooched horizontal surface
- 5" underride with intermediate step
- Rubber bumper blocks
Liftgates
- Tuckaway liftgates; up to 3,000-lb. capacity
- Liftgate cutoff switch, cab mounted
- Extra heavy-duty liftgate bumper (BS-11)
- Structural liftgate bumper (BS-55)
Miscellaneous
- Walkramps: standard or ventilated
- Stainless steel front and top radii
- Stainless steel rear frame
- Conspicuity tape
- Backup alarm
Reinforcement Options
- External rear frame gussets
- Steel hat posts on 16" centers
- Reinforced rear end plate
| |
