Truck Equipment >> Aluminum Standard Specifications |
Insulated Dry Freight Standard Specifications |
| |
Body Lengths: 10' - 30'
Body Heights: 79" - 109"
Subframe: 4" I-beam long rails, 3" I-beam crossmembers & galvannealed steel front end plate. 10'-16' bodies have 16" centers for class 3 & 4 GVW chassis only, and are not designed for forklift & pallet jack loading. 18'-30' bodies have 12" centers & wheelpans to permit pallet jack and forklift operation.
Floor Type: 1-1/8" laminated hardwood, fastened in staggered pattern, front seals, galvanized steel threshold with rear drain trough.
Side Walls: Sheet & Post - .040" aluminum, 1-3/8" steel Z posts (16" centers on 18'-28' bodies, 24" centers on 10'-16' bodies), uniform quality rivet installation.
Front-end Assembly: Aerodynamic design with contoured Poly-Tuff corner caps, aluminum 9" top radius and 5" corner radius. Streamlined extruded aluminum body moldings, connectors & rails.
Rear Frame: Header design with rain channel/drip rail permits 1" narrower header & better protection for clearance lights. Extended truck chassis L-channel & Morgan steelchannel U-bolt attachment plates for improved body support. High, wide door opening, with curb-side grab handle.
Roof Assembly: .032" aluminum with Morgan's anti-snag bows for improved adhesive seal at all contact points & easier cargo/forklift exit. |
|
| 1-1/8" laminated hardwood floor. Polystyrene block foam is pre-cut to fit between 12" centered crossmembers. |
1-5/16" polystyrene block foam, pre-cut to fit into cavities of sidewalls and ceiling, with fiberglass insulation in irregular size areas. 5.22mm lauan plywood liner on sides, front and ceiling. |
Glassboard panel on underside with edges capped for extra protection and clean finish. | |
| Dimensional Data |
| GVSDI 85 |
96" |
92-1/2" |
91-3/8" |
84-1/2" |
88" |
79-1/4" |
40-11/16" |
78-1/4" |
| GVSDI 91 |
96" |
92-1/2" |
97-3/8" |
90-1/2" |
88" |
85-1/4" |
40-11/16" |
78-1/4" |
| GVSDI 97 |
96" |
92-1/2" |
103-3/8" |
96-1/2" |
88" |
91-1/4" |
40-11/16" |
78-1/4" |
| Notes: |
A. Outside height dimension includes roof crown, but does not include body longitudinals.
B. Overhead rear doors protrude into top of door opening 1" to 1-1/2" when in the up position. | |
| Body Length |
| Outside |
10'5-5/8" |
12'5-5/8" |
14'5-5/8" |
16'5-5/8" |
18'5-5/8" |
20'5-5/8" |
22'5-5/8" |
24'5-5/8" |
| Inside* |
9'11-1/2" |
11'11-1/2" |
13'11-1/2" |
15'11-1/2" |
17'11-1/2" |
19'11-1/2" |
21'11-1/2" |
23'11-1/2" | |
| 26' |
28' |
| Outside |
26'5-5/8" |
28'5-5/8" |
| Inside* |
25'11-1/2" |
27'11-1/2" | |
A. Inside length is based on roll-up door; add 1-1/2" for swing doors.
B. Rear light protector extends beyond rear frame 2-1/4". Add this dimension if body does not have a dock extension.
* Inside length is nominal and measured from front liner to inside rear door panel. | |
| Calculated Weight (lbs.) |
|
| Model |
| GVSDI 85 |
2257 |
2608 |
2801 |
3016 |
3111 |
3426 |
3617 |
| GVSDI 91 |
2305 |
2662 |
2858 |
3078 |
3275 |
3496 |
3687 |
| GVSDI 97 |
2374 |
2737 |
2936 |
3159 |
3361 |
3585 |
3782 |
Body Weight Includes: Base body (Z-post construction), overhead door, D.O.T. underride, mud flaps, lighting per FMVSS-108, mounting kit and plywood liner (front and sides). Weight tolerance is ± 3%.
* Contact your Morgan representative for specific GVSD model weights. | |
| |
| Insulated Thickness |
| 1-5/16" (walls) |
5.25 |
| 2-9/16" (floor) |
10.25 |
| 4" (front wall w/ reefer unit) |
16.0 |
| 3/4" Composite Door |
3.0 | |
| |
